Shop
-
Melting Point Apparatus BDI-77
For determination of melting points up to 350°C. The mounting block is illuminated from below by a lamp fixed in its housing. The aluminum block accepts three capillary tubes and Mercury Thermometer. The temperature is regulated by the Energy Regulator fitted to the unit. The lamp provides uniform and shadows less light, regulator fitted to the unit. Supplied without capillary tubes and thermometer.
-
Soxhlet Extraction Units (Mantel Type) BDI-78
Standard mild steel body and upright fittings. Body finished in stove heating paint and other parts are duly chrome plated. Housing provided with heating mantels for surface temp. up to 300 °C. Provided with a common energy regulator to control all units, individual on-off switches & pilot lamps. To work on 220V AC. Without glass parts.
-
Tissue Culture Rack BDI-140
Made out of tubular M.S. Pipes/tubular aluminum pipe duly painted for longer life. Each rack of size 48”x21” (Depth) is covered with thick unbreakable Flexi glass/helium Sheet. Distance between each rack is 15”. Each rack is fitted with 4 fluorescent tubes, 4 bulbs, and one U.V germicidal light.
-
Tissue Culture Hood BDI-141
Made of sun mica clad thick wooden board and sun mica clad working top. The unit has a frame at front fitted with transparent Flexi glass and has an arrangement for keeping the door open if desired. Fitted with U.V. Germicidal light and one Fluorescent Tube.
-
Moisture Analyser (Digital) BDI-142
Sturdy & versatile equipment is suitable for a wide range of grains, oilseeds, pulses, etc. It has an inbuilt battery indicator and is high speed and accuracy.
-
Moisture Analyser (Digital) Direct Reading BDI-142A
Sturdy & versatile equipment is suitable for a wide range of grains, oilseeds, pulses, etc. It has an inbuilt battery indicator and is high speed and accuracy.
-
Infrared Moisture Balance BDI-142B
Aluminum body duly finished with hammer tone paint, heat control with an electronic regulator. Easy to operate. With an accuracy of 0.2% by direct reading 0.1%. Complete with L-shaped thermometer, 10- Disposal Pan, One tweezer and instructional manual.
-
Magnetic Stirrer (With Hot Plate And Heavy Duty Permanent Magnet) BDI-143
It has a compact stirring device utilizing magnetic field (created by a Permanent Magnet) which induces variable speed stirring action. Stirring is accomplished by means of the small Teflon rotor, which when placed to be stirred is capable of rotation by a magnetic field applied from below the container. The unit is fitted with a pilot lamp. Works on 220/230 volts A.C.
-
Laboratory Stirrer BDI-143A
The motor stirrer having maximum speed up to 4000 r.p.m. Unit is clamped to C.P. rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed motor with 1/20 H.P. Regulator is fitted with S.S. stirrer rod to give smooth and noiseless operation.
-
Tissue Homogeniser BDI-144
Heavy & stable cast iron base duly painted with mild steel chrome plated upright provided with strong adjustable clamps to hold a motor with stirring rod of stainless steel with Teflon grinder and clamp to hold tissue homogenizing vessel of borosilicate glass which is also adjustable. Speed variable through a control unit to work on 220V AC 50Hz single phase Motor used is of 1/20 H.P
-
Rotary Shaker (VDRL Rotator) Fixed Speed BDI-145
Suitable for VDRL and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Body made of sturdy mild steel sheet duly finished in stoving enamel/powder coated paint. Tray type platform size 300×300 mm can take cavity slides, bottles flask, etc; for shaking at a fixed speed by the help of spring wires. Standard fixed speed of 180 RPM.
-
Shaking Machine (Wrist Action) BDI-146
Heavy cast iron base with sturdy construction with two side arms for holding flasks. A heavy-duty fractional motor with variable speed through continuously variable speed controller is provided. The holder can hold flasks of capacity 100 to 1000 ml. Supplied complete with cord & plug etc. To work on220V AC 50Hz single phase. Speed 80-280 oscillations per minute.
-
Vortex Shaker/Cyclo Mixer (Test Tube Shaker) BDI-147
Useful for accelerated mixing of solutions in test tubes, small flasks or centrifugal tubes, etc. The housing is 150×150 mm. The speed is regulated by a speed control devices. Shorts eccentric stroke motor imparts vigorous agitation to the tubes or flasks.
-
Reciprocating Shaking Machine (Kahn Rack Type) BDI-148
Designed for shaking Kahn racks, bottles, flasks of different size by adjusting compartments. Fitted with a heavy-duty motor to work on 220V, AC 50 Hz single phase. The rate of motion is adjustable mechanically by belt tension. Speed is fixed in the same models to approximately 275.
-
Rotary Shaker (Platform Type) BDI-149
Body made out of thick mild steel finished in stoving enamel/powder coated paint. The heavy-duty motor of suitable capacities is provided for long-duration operations. Fixed speed and variable speed models are offered. The platform is provided with rubber discs or stainless steel clamps to hold flasks. To work on 220V AC 50 Hz single phase.
-
Lab Willey Grinder (Arthur H. Thomas Type) BDI-150
Recommended for grinding of dry plant samples. Also for a great variety of commercial dry materials. The unit has two stationary steel edges provided in the cast Iron chamber. A removable safety Glass sheet plate from the face of the chamber of permit observation during operation. Willey Mill is fitted on substantial Cast iron base.