Heat and Refrigeration
-
Autoclave (Vertical) Double Wall BDI-81
A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jackets made of thick stainless steel. The outer chamber is made out of thick mild steel/Stainless Steel. The lid is made out of thick stainless steel plate (joint less) or gunmetal and can be sealed by a joint less neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover.
-
Autoclave Laboratory (Portable) BDI-80
Suitable for general laboratory use and sterilization. Stainless steel or aluminum vertical body. Pressure range 15 psi to 18 psi. Domed cover can be sealed by joint-less gasket which is clamped to the vessel by wing nuts by hinged bolts which engage slotted lugs on rim of the cover. Provided with dial pressure gauge. Spring loaded safety valve has threaded cap for pressure adjustments. Supplied complete with plug & cord and is suitable to work on 220V AC 50Hz single phase.
-
Autoclave Vertical High Pressure (Triple walled) BDI-81A
Most useful for sterilizing the loaded material under a steam pressure of 10 to 20 psi (adjustable). It has inner chamber, steam jacket and outer wall made of S.S. duly argon arc welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss. The lid is made of thick stainless steel and closed by radial type closing arrangement. Fitted with a gasket made up of neoprene rubber, safety valve. Drain cock, water inlet, water level indicator, steam release valve, pressure gauge, and pedal lifting device and S.S. basket. Supplied complete with cord and plug to work on 220/440 volt A.C. supply. And supplied without dressing bins.
-
Blood Bank Refrigerator BDI-86
A highly efficient refrigeration system consists of hermetically sealed compressor, for high performance cooling coil runs all around the cabinet to maintain uniformity of temperature.
-
Bottle Dryer BDI-52
Standard sturdy double wall fabrication. Inner & outer chamber made out of thick mild steel sheet. Inner chamber backed silver paint finish and exterior finished in hammertone. Heavy duty forced air blowers are provided to constantly circulate hot air to achieve uniform temperature in the whole chamber. Double wall door is mounted on heavy hinges and provided with heavy moulded latch.
-
Constant Temperature Refrigeration Liquid Bath (Cooling Bath) BDI-65
Standard Double Wall construction. Inner chamber made out of thick, highly polished stainless steel sheet. Temperature range 5°C to 90°C and controlled by a sensitive Mercury Contact Thermometer with an accuracy of ±1°C. Fitted with a stirrer, and FHP pump for circulating the cold liquid to the external equipment.
-
De-Humidifier BDI-89A
These are water condensing type, based on “Refrigeration Cycle” to avoid use of expensive chemicals required for desiccant type models. The unit is self standing and is mounted on a study angle iron frame. Fitted with castor wheels. It removes excess moisture from the atmosphere and is fitted with hermetically sealed compressor. Heat exchanges and water condensing coils are made of copper.
-
Deep Freezer (Chest Type & Vertical) BDI-88
Double walled with inner chamber made of S.S and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to -20°C is achieved by hermetically sealed compressor. Body is mounted on a sturdy angle iron frame and is mounted on castor wheels. Unit is fitted with solid State Digital Temperature Indicator-cum-Controller. Horizontal Chest type models are supplied in a single compartment where as vertical models are supplied with three stainless steel storing shelves.
-
Digital Hot Air Oven (Memmert Type) BDI-50
Standard wall fabrication, Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in shoved enamel off-white paint or powder coating color combinations. The gap between the walls is filled with special grade glass-wool for heat insulation.
Inner chamber is ribbed for placing shelves at convenient levels. Provide with two or three removable shelves. A special elegant closing device has been provided.
-
Egg Incubator BDI-54B
Outer wall is made of M.S. sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations and inside of stainless steel. The gap between inner and outer wall is filled with high grade mineral glass wool. Temperature range from ambient to 70° C is controlled by “EGO” / “JUMO” German capillary type thermostat with an accuracy of ± 0.5° C. The unit is provided with manual tilting device, so as to tilt the tray holding the eggs. To work on 220/230 volts A.C. supply.
-
Environmental Chamber Humidity Cabinet (Temperature Control/ “Digital”) BDI-84
Temperature range ambient temperature to 60°C. Temperature controlled by a hydraulic thermostat with an accuracy of ±1°C with built-in horizontal ‘L’ shape thermometer. The humidity is controlled by Humidistat from atmospheric humidity to 95% with a sensitivity of ±3%. Double walled inside anodized Aluminum/Stainless steel and outside Mild steel painted in epoxy powder coating. The door has glass window. To work on 220/230 volts A.C. Inside water tank is made of stainless steel but with added specification for low temperature Control & Humidity.
-
Glass Bead Sterilizer BDI-70
An alternative to traditional methods of sterilizing, once switched ‘ON’ the units are ready to use within 30 minutes and ensure total destruction of all micro-organism within seconds. The preset temperature of 230°C-250°C, incorporated with a thermostat with an accuracy of ±1°C of the preset range. These are compact enough to be placed on any Laminar Air Flow Bench or any other work side tables in a cleanroom. To work on 220volts A.C.
-
Heating Mantle BDI-74
It withstands high temperature up to 350°C. The body of the mantle is spun in one piece from non-rusting Aluminum (up to 5.0liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished color combinations. All heating mantles are lagged with special grade mineral wool. Works on 220/230Volts A.C.
-
High Temperature Furnace 1200°C (Industrial) BDI-73
The furnace is insulated with ceramic fiber blanket of high density for better insulation. The furnace can run continuously at 1150°C, trouble-free. The furnace is quick heating type, light in weight, table mounting type, compact, elegant in design. Outer painted in epoxy powder coating.
-
Horizontal Autoclave BDI-82
Most ideal for any institute or laboratory doing bulk sterilizing and research work. This autoclave has double walled chamber and a boiler and these are mounted on a heavy duty mild steel stand. The inner made of thick stainless steel sheet and outer chamber is made of stainless steel/ mild steel sheet. Automatic self closing device to prevent opening of the door while the sterilize is in operation. Stainless steel steam generation unit fitted with easily replaceable heating element. Fitted with Pressure control switch. Pressure setting range 10 to 20 psi.