Shop
-
Moisture Analyser (Digital) BDI-142
Sturdy & versatile equipment is suitable for a wide range of grains, oilseeds, pulses, etc. It has an inbuilt battery indicator and is high speed and accuracy.
-
Tissue Culture Hood BDI-141
Made of sun mica clad thick wooden board and sun mica clad working top. The unit has a frame at front fitted with transparent Flexi glass and has an arrangement for keeping the door open if desired. Fitted with U.V. Germicidal light and one Fluorescent Tube.
-
Tissue Culture Rack BDI-140
Made out of tubular M.S. Pipes/tubular aluminum pipe duly painted for longer life. Each rack of size 48âx21â (Depth) is covered with thick unbreakable Flexi glass/helium Sheet. Distance between each rack is 15â. Each rack is fitted with 4 fluorescent tubes, 4 bulbs, and one U.V germicidal light.
-
Melting Point Apparatus BDI-77
For determination of melting points up to 350°C. The mounting block is illuminated from below by a lamp fixed in its housing. The aluminum block accepts three capillary tubes and Mercury Thermometer. The temperature is regulated by the Energy Regulator fitted to the unit. The lamp provides uniform and shadows less light, regulator fitted to the unit. Supplied without capillary tubes and thermometer.
-
Slide Warming Table BDI-76
Temperature range ambient temperature to 70°C i.e. below the melting point of the wax. The temperature is thermostatically controlled. The body is made out of thick mild steel duly finished in white stoving enamel/powder coated paint with mat finished color combinations and the top is made of highly polished aluminum sheet. To work on 220V AC 50Hz single phase.
-
Seed Storage Cabinet (with Temperature and Humidity) BDI-139
It has a double door at the front, allowing a wide range for storage of various seeds under controlled conditions of temperature and humidity. This double-walled unit has an outer chamber made of M.S. duly enamel painted and inner chamber is made of Stainless Steel. The chamber has glass windows which allow easy inspection of samples. The inner chamber is fitted with 4no.s fluorescent tubes and 0-24 hrs. a timer to control cyclic illumination conditions. Humidity can be achieved and adjusted (variable) from 80% to 95% Âħ 3% RH. Temperature range 5°C ambient to 40°C which is controlled by Digital Temperature Indicator-cum-controller. The unit works on 220 volts AC.
-
Seed Storage Cabinet BDI-138
Made out of thick PCRC sheet duly painted. Size of each tray is 12â x 12â x 4â (Height) and into 4 compartments with index cardholder. Fitted with handle, lock, and key.
-
Heating Mantle BDI-74
It withstands high temperature up to 350°C. The body of the mantle is spun in one piece from non-rusting Aluminum (up to 5.0liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished color combinations. All heating mantles are lagged with special grade mineral wool. Works on 220/230Volts A.C.
-
High Temperature Furnace 1200°C (Industrial) BDI-73
The furnace is insulated with ceramic fiber blanket of high density for better insulation. The furnace can run continuously at 1150°C, trouble-free. The furnace is quick heating type, light in weight, table mounting type, compact, elegant in design. Outer painted in epoxy powder coating.
-
Rectangular Muffle Furnace (Laboratory model) BDI-72
Outer shell made out of thick mild steel duly finished in attractive stoving enamel/powder coated paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum Temperature 1000°C and working temp. 900°C controlled by SUNVIC Energy Regulator. Complete with Indicators, Pyrometer, Thermocouple, Thermal Fuse, etc. workable on 220V AC 50 Hz single phase.
-
Seed Dryer BDI-137
Double-walled, inner made of Anodized Aluminium, outer made of Mild steel enamel painted, properly insulated, Provided with metallic insulated door with best quality hinges, handle synthetic gasket, etc. The inner chamber is provided with perforated shelves, the chamber is provided with heating elements made of kanthal wire with temperature Indicator with a fan. Temperature from ambient to 120° C. Controlled by Digital Temp controller-cum-indicator.
-
Tube Heating Block (Dry Bath) BDI-70A
This Block is comprised of an outer case with heater and thermostat, fitted with aluminum blocks drilled to accept test tubes of 25mm dia. Temperature control by means of a thermostat. Outside painted in epoxy powder coating. The outer case is insulated and ventilated.
Temperature range 90°C to 300°C. The chamber has 40 holes to accept 25mm dia. test tubes.
-
Plant Growth Chamber (Small) BDI-136
Inside made of stainless steel sheet. Outside mild steel sheet with finished in white stoving enamel/powder coated paint with mat finished color combinations. Fitted with cooling, heating and lighting arrangements. Temperature range 5ÂşC to 50ÂşCÂħ 1ÂşC.
-
Seed Germinator (Dual Chamber) BDI-135
Temperature range from 5°C to 50°C. Temperature controlled by Digital temperature indicator cum controller in the variation of Âħ1°C. Chamber with 14 perforated trays. Chamber is provided with a stainless steel water reservoir at the bottom. Humidity from 90 to 95% Âħ3 % (not adjustable) Double-walled inside made of anodized Aluminium/stainless steel and outside Mild steel painted in epoxy powder coating. To work on 220/230 volts 50 cycles A.C. only. For cooling a sealed compressor unit has been provided below the chamber to work independently.
-
Seed Germinator (Single Chamber) BDI-134
Temperature range from 5°C to 50°C. Temperature controlled by Digital temperature indicator cum controller in the variation of Âħ1°C. Chamber with 14 perforated trays. Chamber is provided with a stainless steel water reservoir at the bottom. Humidity from 90 to 95% Âħ3 % (not adjustable) Double-walled inside made of anodized Aluminium/stainless steel and outside Mild steel painted in epoxy powder coating. To work on 220/230 volts 50 cycles A.C. only.
-
Inoculation Chamber BDI-133
Economical Clean-air chamber for transfer of tissues and other tissues culture work and use as a dry-box and by dust-proof bacteria free clean uncontaminated environmental enclosure. Fabricated out of thick plyboard clad, externally laminated sheet and inner exposed areas painted with chemically resistant epoxy paint. It’s provided with a tightly covered rectangular opening on one side for putting in the material. A clear fixed acrylic sheet window provided in front of observation. Complete with fluorescent lighting and germicidal ultraviolet tube.