Heat and Refrigeration
-
Melting Point Apparatus BDI-77
For determination of melting points up to 350°C. The mounting block is illuminated from below by a lamp fixed in its housing. The aluminum block accepts three capillary tubes and Mercury Thermometer. The temperature is regulated by the Energy Regulator fitted to the unit. The lamp provides uniform and shadows less light, regulator fitted to the unit. Supplied without capillary tubes and thermometer.
-
Heating Mantle BDI-74
It withstands high temperature up to 350°C. The body of the mantle is spun in one piece from non-rusting Aluminum (up to 5.0liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished color combinations. All heating mantles are lagged with special grade mineral wool. Works on 220/230Volts A.C.
-
High Temperature Furnace 1200°C (Industrial) BDI-73
The furnace is insulated with ceramic fiber blanket of high density for better insulation. The furnace can run continuously at 1150°C, trouble-free. The furnace is quick heating type, light in weight, table mounting type, compact, elegant in design. Outer painted in epoxy powder coating.
-
Rectangular Muffle Furnace (Laboratory model) BDI-72
Outer shell made out of thick mild steel duly finished in attractive stoving enamel/powder coated paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum Temperature 1000°C and working temp. 900°C controlled by SUNVIC Energy Regulator. Complete with Indicators, Pyrometer, Thermocouple, Thermal Fuse, etc. workable on 220V AC 50 Hz single phase.
-
Tube Heating Block (Dry Bath) BDI-70A
This Block is comprised of an outer case with heater and thermostat, fitted with aluminum blocks drilled to accept test tubes of 25mm dia. Temperature control by means of a thermostat. Outside painted in epoxy powder coating. The outer case is insulated and ventilated.
Temperature range 90°C to 300°C. The chamber has 40 holes to accept 25mm dia. test tubes.
-
Glass Bead Sterilizer BDI-70
An alternative to traditional methods of sterilizing, once switched ‘ON’ the units are ready to use within 30 minutes and ensure total destruction of all micro-organism within seconds. The preset temperature of 230°C-250°C, incorporated with a thermostat with an accuracy of ±1°C of the preset range. These are compact enough to be placed on any Laminar Air Flow Bench or any other work side tables in a cleanroom. To work on 220volts A.C.
-
Water Still (Manasty Type)
Wall hanging casted aluminum vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging arrangement is provided. The condenser is seamless.
-
Refrigerated Liquid Bath BDI-66
Standard Construction, Inner Chamber made out of stainless steel sheet with Digital Temperature Indicator-cum-Controller. Temperature can be controlled from range -20°C to +20°C.
-
Constant Temperature Refrigeration Liquid Bath (Cooling Bath) BDI-65
Standard Double Wall construction. Inner chamber made out of thick, highly polished stainless steel sheet. Temperature range 5°C to 90°C and controlled by a sensitive Mercury Contact Thermometer with an accuracy of ±1°C. Fitted with a stirrer, and FHP pump for circulating the cold liquid to the external equipment.
-
Universal Water Bath (Dual Purpose) BDI-64
Useful for dual purpose. It is a combination of serological and routine rectangular water bath with holes and concentric rings.
-
Oil Bath (High Temperature) BDI-63
Double Wall construction. Inner chamber made of highly polished stainless steel sheet and the outer is made of mild steel duly finished in white stoving enamel/powder coated paint with mat finished color combinations. Temperature range 50°C to 250°C ±2°C is controlled by a thermostat. Supplied complete with a stirrer, diffuser shelves, cover, etc.
-
Water Bath Tissue Flotation BDI-62
Double Wall round construction. Inner chamber Stainless Steel/black anodized aluminum and outer made out of mild steel painted in epoxy powder coating. Thermostatic Controlled Temperature range 5°C above ambient to 80°C ±1°C. Complete with indicators, wire & plug. To work on 220V A.C.without Thermometer.
-
Water Bath Paraffin BDI-61
Temperature range from ambient temperature to 95°C. Thermostatic control with an accuracy of ±1°C. Double-walled, inside stainless steel and outside mild steel sheet painted in epoxy powder coating. Top of the bath and concentric rings are made of stainless steel. Work on 220/230 volts A.C.
-
Water Bath Precision (Constant Temperature Control) BDI-60
Construction is as per BDI-57. But with glass windows on both opposite sides for observation. Temperature controlled by Mercury Contact Thermometer with a sensitivity of ±1°C. Suitable for precision laboratory activities requiring constant temperature with a high degree of accuracy. Complete with a stirrer, workable on 220V AC 50 Hz single phase.