Heat and Refrigeration
-
Kjeldahl Units BDI-79
Made out of mild steel duly finished in white stoving enamel/powder coated paint with mat finished color combinations other metallic parts are chrome plated.
-
Hot Plate BDI-75
The body is fabricated out of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with mat finished color combinations. The hot plate made of cast iron or top is made of highly polished stainless steel sheet precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body.
-
De-Humidifier BDI-89A
These are water condensing type, based on “Refrigeration Cycle” to avoid use of expensive chemicals required for desiccant type models. The unit is self standing and is mounted on a study angle iron frame. Fitted with castor wheels. It removes excess moisture from the atmosphere and is fitted with hermetically sealed compressor. Heat exchanges and water condensing coils are made of copper.
-
Humidifier BDI-89
Humidifier is basically an Atomizing Humidifier of splash plate rotating disc type. Designed to give relative humidity as high as up to 95% RH in enclosed areas. Humidifier is a portable unit body made of Aluminum/Stainless steel. Capable of atomizing up to three liters of water in an hour at full evaporation in the driest possible ambient conditions. Provided with automatic flout valve assembly to work on 220V AC.
-
Deep Freezer (Chest Type & Vertical) BDI-88
Double walled with inner chamber made of S.S and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to -20°C is achieved by hermetically sealed compressor. Body is mounted on a sturdy angle iron frame and is mounted on castor wheels. Unit is fitted with solid State Digital Temperature Indicator-cum-Controller. Horizontal Chest type models are supplied in a single compartment where as vertical models are supplied with three stainless steel storing shelves.
-
Vaccine Storage Cabinet BDI-87
Vaccine storage cabinet, the most versatile unit for vaccine storage. Inner chamber made of stainless steel external mild steel sheet body of rigid steel frame. Insulated thoroughly provided with face fitting doors, complete with self- closing hinges lockable fasteners.
-
Blood Bank Refrigerator BDI-86
A highly efficient refrigeration system consists of hermetically sealed compressor, for high performance cooling coil runs all around the cabinet to maintain uniformity of temperature.
-
Mortuary Chamber / Freezer BDI-85
Used for storing cadaverous under low temperature cool conditions in order to prevent decomposition. These units are double walled with outer made of M.S. sheet duly painted and inner wall of stainless steel. Front opening covered door with magnetic gasket lock & key and handle individual chambers are provided independent lock with duplicate keys.
-
Environmental Chamber Humidity Cabinet (Temperature Control/ “Digital”) BDI-84
Temperature range ambient temperature to 60°C. Temperature controlled by a hydraulic thermostat with an accuracy of ±1°C with built-in horizontal ‘L’ shape thermometer. The humidity is controlled by Humidistat from atmospheric humidity to 95% with a sensitivity of ±3%. Double walled inside anodized Aluminum/Stainless steel and outside Mild steel painted in epoxy powder coating. The door has glass window. To work on 220/230 volts A.C. Inside water tank is made of stainless steel but with added specification for low temperature Control & Humidity.
-
Humidity Cabinet BDI-83
Temperature range ambient temperature to 60°C. Temperature controlled by a hydraulic thermostat with an accuracy of ±1°C with built-in horizontal ‘L’ shape thermometer. The humidity is controlled by Humidistat from atmospheric humidity to 95% with a sensitivity of ±3%. Double walled inside anodized Aluminum/Stainless steel and outside Mild steel painted in epoxy powder coating. The door has glass window. To work on 220/230 volts A.C. Inside water tank is made of stainless steel.
-
Horizontal High Pressure Cylindrical Steam Sterilizer BDI-82A
Robust and rigid construction, designed for all type of bulk sterilization which are commonly required in medical, Agriculture and Pharmaceuticals. This is triple walled with steam jacket and separate boiler. The sterilizer has single place door. Inside and outside are made of stainless steel. All constructions are of stainless steel. Complete with dial type thermometer. Pressure control switch.
-
Horizontal Autoclave BDI-82
Most ideal for any institute or laboratory doing bulk sterilizing and research work. This autoclave has double walled chamber and a boiler and these are mounted on a heavy duty mild steel stand. The inner made of thick stainless steel sheet and outer chamber is made of stainless steel/ mild steel sheet. Automatic self closing device to prevent opening of the door while the sterilize is in operation. Stainless steel steam generation unit fitted with easily replaceable heating element. Fitted with Pressure control switch. Pressure setting range 10 to 20 psi.
-
Autoclave Vertical High Pressure (Triple walled) BDI-81A
Most useful for sterilizing the loaded material under a steam pressure of 10 to 20 psi (adjustable). It has inner chamber, steam jacket and outer wall made of S.S. duly argon arc welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss. The lid is made of thick stainless steel and closed by radial type closing arrangement. Fitted with a gasket made up of neoprene rubber, safety valve. Drain cock, water inlet, water level indicator, steam release valve, pressure gauge, and pedal lifting device and S.S. basket. Supplied complete with cord and plug to work on 220/440 volt A.C. supply. And supplied without dressing bins.
-
Autoclave (Vertical) Double Wall BDI-81
A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jackets made of thick stainless steel. The outer chamber is made out of thick mild steel/Stainless Steel. The lid is made out of thick stainless steel plate (joint less) or gunmetal and can be sealed by a joint less neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover.
-
Autoclave Laboratory (Portable) BDI-80
Suitable for general laboratory use and sterilization. Stainless steel or aluminum vertical body. Pressure range 15 psi to 18 psi. Domed cover can be sealed by joint-less gasket which is clamped to the vessel by wing nuts by hinged bolts which engage slotted lugs on rim of the cover. Provided with dial pressure gauge. Spring loaded safety valve has threaded cap for pressure adjustments. Supplied complete with plug & cord and is suitable to work on 220V AC 50Hz single phase.
-
Soxhlet Extraction Units (Mantel Type) BDI-78
Standard mild steel body and upright fittings. Body finished in stove heating paint and other parts are duly chrome plated. Housing provided with heating mantels for surface temp. up to 300 °C. Provided with a common energy regulator to control all units, individual on-off switches & pilot lamps. To work on 220V AC. Without glass parts.